
Editing techniques
How to Use Keyframes in Final Cut Pro
Add, move, copy and delete keyframes in the inspector, the viewer and the Video Animation editor, then smooth them out with easing. Plus Ken Burns moves, fades, effect keyframes and the mistakes to avoid.
In this post
Keyframes are how you make things change over time in Final Cut Pro: a title that slides in, a photo that slowly zooms, a clip that fades to black, a blur that ramps up. This guide walks through every way to add, adjust and remove keyframes in Final Cut Pro 12, the common moves you will use most, and the mistakes that trip people up. Every step is checked against Apple's Final Cut Pro User Guide.
Key takeaways
- You need at least two keyframes with different values to animate a setting. Final Cut Pro fills in every frame in between.
- Add keyframes in the Video inspector, in the viewer with onscreen controls, or in the Video Animation editor (Control-V). Option-K adds one at the playhead.
- Once a setting has a keyframe, changing its value at another point adds a new keyframe automatically.
- Delete a keyframe with Option-Shift-Delete in the Video Animation editor, or by clicking the solid Keyframe button in the inspector.
- Control-click the line between keyframes to choose Linear, Ease, Ease In or Ease Out, and set position keyframes to Smooth for curved paths.
- The built-in Ken Burns effect (Shift-C) and fade handles animate without any keyframes.
What keyframes do
A keyframe stores the value of one setting at one moment in a clip. Set Scale to 100% at one keyframe and 120% at a later one, and Final Cut Pro calculates every frame in between, so the image grows smoothly. Apple describes Final Cut Pro as an automatic “in-between artist”: you set the key moments and it does the rest.
You can keyframe clip properties like position, scale, rotation, crop and opacity, the parameters of most video effects (including color corrections) and audio effects. To animate anything you need at least two keyframes with different values.
Add keyframes in the Video inspector
The inspector is the most precise place to keyframe, because you can type exact values.
- Select the clip in the timeline and open the inspector (Command-4). Click the Video button at the top of the inspector.
- Move the playhead to where the change should start.
- Hover over the setting you want to animate, for example Position in the Transform section, and click the Keyframe button (the diamond) next to it, or press Option-K. The button becomes solid to show the playhead is on a keyframe.
- Move the playhead to where the change should end. The Left and Right Arrow keys move one frame at a time.
- Change the value. Because the setting already has a keyframe, Final Cut Pro adds a new one for you.
As you move the playhead, small arrows appear beside the Keyframe button to show which side of the playhead has keyframes. Click the left or right arrow to jump to the previous or next keyframe, then change the value to update that keyframe. To see an effect's individual parameters, hover over the effect in the inspector and click Show.
Animate in the viewer with onscreen controls
For moves you want to see while you make them, use the onscreen controls in the viewer. This is the quickest way to animate position, size and rotation with the built-in Transform effect (see Work with built-in effects).
- Select the clip and put the playhead at the start of the move.
- Click the pop-up menu in the lower-left corner of the viewer and choose Transform, or press Shift-T.
- Drag the onscreen controls to set the starting position: corner handles scale the image, the handle extending from the center circle rotates it, and dragging inside the image moves it.
- Click the Add Keyframe button in the upper part of the viewer.
- Move the playhead to the end of the move and drag the controls again. Final Cut Pro adds a keyframe automatically, and a red line shows the motion path.
- Click Done in the upper-right corner of the viewer.
Add more keyframes by moving the playhead and dragging again. Click the white squares on the red line to jump between keyframes. Control-click a keyframe on the path for more options: Smooth (curved path with Bezier handles), Linear (a straight corner), Delete Point, Lock Point and Disable Point. Crop and Distort can be animated in the viewer the same way.
Use the Video Animation editor
The Video Animation editor shows every effect on a clip with its keyframes, right in the timeline. It is the best place to change timing.
- Open it: select the clip and choose Clip > Show Video Animation (Control-V), or Control-click the clip and choose Show Video Animation. Press Control-V again to hide it.
- Add a keyframe: Option-click on an effect's row where you want the keyframe, or press Option-K. Option-click while dragging the row up or down adds a keyframe and sets its value in one go.
- Pick a parameter: for effects with several parameters, click the down arrow next to the effect name and choose a parameter, or All. Keyframes for the chosen parameter are white diamonds, others are gray, and double diamonds mean several parameters share that keyframe.
- Expand an effect: click the disclosure button (or double-click the effect) to see its value curve. Now you can drag keyframes up or down to change values, as well as left and right to change timing. Hold Command while dragging for finer control.
- Keyframe a range: with the effect expanded, choose the Select tool (A) or Range Selection tool (R), drag across part of the clip and drag the effect's line up or down. Final Cut Pro adds the keyframes for you.
- Reduce clutter: choose Clip > Solo Animation (Control-Shift-V) to show one effect at a time.
Move, copy and delete keyframes
Jump between keyframes
Select a parameter in the Video Animation editor and press Option-Semicolon (;) for the previous keyframe or Option-Apostrophe (’) for the next. In the inspector, use the arrows beside the Keyframe button.
Move keyframes
Drag a keyframe left or right in the Video Animation editor; the timecode appears as you drag. To work on several at once, Shift-click them or drag a selection rectangle around them (you can only select a continuous run). Then:
- Drag one of them sideways to move the whole group in time, or up and down to change all their values together.
- Press Comma (,) or Period (.) to nudge the selection one frame earlier or later.
- Press Option-Up Arrow or Option-Down Arrow to raise or lower their values by 1.
- Hold Command-Option and drag a keyframe or curve up or down to shift every keyframe on that curve by the same amount.
See Modify groups of keyframes for more.
Copy and paste keyframes
- Show the Video Animation editor (Control-V) and double-click the parameter's graph to expand it.
- Shift-click the keyframes to copy, or drag a rectangle around them. They highlight in yellow.
- Choose Edit > Keyframes > Copy (Option-Shift-C), or Cut (Option-Shift-X) to move them.
- Select the destination clip, show its Video Animation editor and click the name or graph of the parameter to paste into.
- Put the playhead where the animation should start and choose Edit > Keyframes > Paste (Option-Shift-V).
Keyframes paste starting at the playhead or skimmer, and only if it is over the selected clip. Pasted keyframes replace any existing keyframes in the same time range on that parameter. Some keyframes can only be pasted onto a similar parameter. Details: Copy and paste keyframes.
Delete keyframes
- In the Video Animation editor, select a keyframe and press Option-Shift-Delete.
- In the inspector, go to the keyframe with the arrows and click the solid Keyframe button.
- In the viewer, Control-click a point on a Transform motion path and choose Delete Point.
To start over on a whole built-in effect, click its Reset button in the Video inspector.
Easing and smooth curves
Real objects speed up and slow down; a move at a constant speed looks mechanical. Final Cut Pro gives you three ways to ease an animation (see Adjust effect curves):
- Curve shape between keyframes: in the Video Animation editor, expand the effect, Control-click the line between two keyframes and choose Linear (constant speed), Ease (slow at both ends), Ease In (starts slowly and accelerates) or Ease Out (starts quickly and decelerates). You can also Command-drag the line horizontally to bend it into a curve.
- Smooth motion paths: in the viewer, Control-click a position keyframe on the red Transform path and choose Smooth. Drag the Bezier handles to shape the path; choose Linear to go back to a straight corner.
- Fade handles: some effects, like Opacity, have fade handles at the start and end of their row in the expanded Video Animation editor. Drag them to fade the effect in or out with no keyframes at all.
Curve shapes between keyframes apply to video effects. For audio volume you can shape fades made with fade handles, but not keyframe curves.
Common keyframe moves
Position and scale: slide-ins and push-ins
To slide a picture-in-picture or a logo on screen, connect it above your main clip (Q), then keyframe Position in the Transform section: start with the image off the edge of the frame, and end at its resting place. For a slow push-in on a shot, set Scale to 100% on the first frame and 110–120% a few seconds later. Click the Overscan button in the viewer to see parts of the image outside the frame. Scaling video above 100% enlarges the pixels, so keep zooms on video modest.
Ken Burns zoom and pan (no keyframes)
Final Cut Pro's built-in Ken Burns effect animates the crop between a start and an end frame, and it is the fastest way to bring photos to life (see Pan and zoom clips).
- Select the clip and put the playhead over it.
- Choose Crop from the pop-up menu in the lower-left corner of the viewer (Shift-C), then click Ken Burns at the bottom of the viewer.
- Resize and drag the green rectangle to set the start frame, and the red rectangle to set the end frame. An arrow shows the direction of the move. Click Swap to reverse it, or Play Loop to preview.
- Control-click the image to choose Ease In and Out (the default), Ease In, Ease Out or Linear.
- Click Done.
For a pan and zoom that follows a more complicated path, use the Crop effect with intermediate keyframes instead, as Apple suggests.
Opacity fades and dissolves
To fade a clip to black, open the Video Animation editor, expand Opacity and drag its fade handle at the end of the clip to where the fade should begin. Or keyframe it: Opacity 100% at one point and 0% at a later point, in the Compositing section of the Video inspector (see Change a clip's opacity). On a connected clip above another, the same keyframes make it dissolve on and off over the clip below.
Keyframing effects and color
Almost every effect parameter in the inspector has a Keyframe button, so you can ramp up a blur, sweep a light, or change a look over time exactly the way you animate Transform. Color corrections work the same way from the Keyframe button at the top of the Color inspector, which is handy when the light changes during a shot (see Keyframe color corrections). Color correction keyframes control every setting in that correction at once.
Tips and common mistakes
- The value changed for the whole clip. You changed a setting that had no keyframe yet. Undo (Command-Z), set the first keyframe, then make the change.
- Option-K or Paste does nothing. Make sure the clip is selected and the playhead or skimmer is over it, and that the right parameter is selected in the Video Animation editor.
- Onscreen controls are missing. They hide during playback, and when a clip has several effects with onscreen controls, only the topmost one shows. Select the effect in the inspector or Video Animation editor to show its controls.
- The move looks robotic. Switch the curve from Linear to Ease, set position keyframes to Smooth, and keep moves slow and purposeful.
- Keyframes got overwritten. Pasting keyframes replaces existing keyframes in the same time range on that parameter.
- Reuse an animation. Choose File > Save Video Effects Preset. If the clip has keyframes, choose Maintain Timing, or Stretch to Fit to scale the animation to the length of whatever clip you apply it to (see Save video effects presets, and our guide to effects presets).
- Copy a whole animation to other clips. Copy the clip (Command-C), select the others and use Edit > Paste Attributes (Shift-Command-V). See how to copy effects between clips.
Save time: animation plugins
Everything above is built into Final Cut Pro, and for one-off moves it is all you need. Some animations, though, take a lot of keyframes to get right: a bounce that settles naturally, an anticipation wind-up before a move, or the same polished entrance on dozens of clips. If you make those often, a preset that already contains the animation saves real time.
Keyframe Replacer: bounce, anticipation and ease without keyframes
Keyframe Replacer is an FCPeffects effect with over 100 preset animations for position, rotation and scale, named so you can tell what they do: pos.bounce in, pos.shift out, rot.ant out and so on. Drag a preset onto a clip and it animates the clip in, out, or both, timed to the length of the clip.
- Fine-tune the bounce, shift and anticipation separately for the X axis, Y axis, scale and angle, including the number of bounces, their acceleration and when each animation starts and ends.
- Presets come in Motion Blur Enabled and Disabled versions. Motion blur looks more natural but takes longer to render.
- It also has fade, blur, border, drop shadow and crop controls, and on-screen guides to help you line things up (turn them off before you export).
- Save your own versions with Save Video Effects Preset.

Keyframe Replacer
Bounce, anticipation and ease animations for position, rotation and scale, without setting a single keyframe.
Automatic Animations: quick animated effects
Automatic Animations takes a different approach: over 100 animated effects, from scale, rotation and position moves to shake, blur, glitchy TV and color effects, with the animation built in. It is a title plugin, so search for “AAP” in the Titles browser and place a preset above the clip you want to affect. Every effect comes in on only, off only and on and off versions, and ON.SPEED, OFF.SPEED and EASE in the inspector control the timing. Many of the on and off presets also work as transitions when you place the middle of the preset over a cut.

Automatic Animations
Over 100 animation effects that need no keyframing. On, off, or on and off, with speed and ease controls.
Both plugins are also in the MEGA BUNDLE with the rest of the FCPeffects collection.
FAQ
How do I add a keyframe in Final Cut Pro?
Select the clip, move the playhead to where the change should start, then click the Keyframe button next to the setting in the Video inspector (or press Option-K). Move the playhead and change the value, and Final Cut Pro adds the next keyframe automatically.
What is the keyboard shortcut for adding a keyframe?
Option-K adds a keyframe at the playhead, in the Video Animation editor or for the selected parameter in the inspector. Option-Semicolon (;) and Option-Apostrophe (’) jump to the previous and next keyframe.
How do I delete a keyframe in Final Cut Pro?
Select the keyframe in the Video Animation editor and press Option-Shift-Delete. Or move the playhead onto the keyframe in the Video inspector (use the arrows next to the Keyframe button) and click the Keyframe button.
Why does changing a setting change the whole clip instead of animating it?
The setting has no keyframes yet, so the new value applies to the entire clip. Click the Keyframe button first to set a starting keyframe; after that, every change you make at a new playhead position adds a keyframe.
How do I make keyframe animation smoother?
In the Video Animation editor, expand the effect, Control-click the line between two keyframes and choose Ease, Ease In or Ease Out instead of Linear. For position moves, Control-click a keyframe on the motion path in the viewer and choose Smooth to get Bezier handles.
How do I copy keyframes to another clip?
Show the Video Animation editor (Control-V), select the keyframes and press Option-Shift-C. Select the parameter on the other clip, put the playhead where the animation should start and press Option-Shift-V. Pasted keyframes replace any existing keyframes in that time range.
How do I do a Ken Burns effect in Final Cut Pro?
Select the clip, press Shift-C (or choose Crop from the pop-up menu in the lower-left corner of the viewer) and click Ken Burns. Set the green rectangle for the start frame and the red rectangle for the end frame, then click Done. Control-click the image to change the easing.
Can I animate in Final Cut Pro without keyframes?
Yes. The built-in Ken Burns effect and fade handles need no keyframes, and plugins such as Keyframe Replacer and Automatic Animations have the animation built into their presets, so you only adjust settings in the inspector.
