
Workflow & tips
Final Cut Pro Keyboard Shortcuts: Full List and Printable Cheat Sheet
The 20 shortcuts worth learning first, organized tables for everyday editing, the Command Editor for your own shortcuts, a printable PDF, and Apple's full shortcut table for Final Cut Pro 12.
In this post
- The 20 most useful Final Cut Pro shortcuts
- Playback and navigation
- Selecting and marking
- Editing in the timeline
- Trimming
- Tools
- Effects, color and keyframes
- Titles, audio and retiming
- Windows and views
- Library, project and export
- Customize shortcuts with the Command Editor
- Printable cheat sheet
- Full list of Final Cut Pro keyboard shortcuts
- FAQ
Keyboard shortcuts are the fastest way to get faster in Final Cut Pro. This page covers the 20 shortcuts worth learning first, organized reference tables for everyday editing, how to customize everything in the Command Editor, and Apple’s full table of shortcuts for Final Cut Pro 12. Every shortcut is checked against Apple's official list. Want it on paper? Download the printable cheat sheet (PDF).
Key takeaways
- Learn J, K, L, I, O, E, Q, W, D and Command-B first; they cover most of a day's editing.
- Option-Command-K opens the Command Editor, where you can search every shortcut and assign your own.
- Duplicate the default command set before you customize, and export it to back it up or use it on another Mac.
- Many shortcuts depend on focus: Command-1, Command-2 and Command-3 move focus to the browser, timeline and viewer.
- Apple's full shortcut table, by category, is at the end of this page.
Key names: Command (⌘), Option (⌥), Control (⌃) and Shift (⇧). “Option-Command-K” means hold Option and Command, then press K. To use a shortcut, press all its keys at the same time.
The 20 most useful Final Cut Pro shortcuts
If you only learn a handful, learn these. They cover playback, marking a selection, the four basic edits, cutting and trimming, and moving around the timeline.
| Shortcut | What it does |
|---|---|
| Space bar | Play or pause |
| J / K / L | Play backward, pause, play forward (press J or L again to double the speed) |
| I / O | Mark the start (In) and end (Out) of a selection |
| E | Add the selection to the end of the project |
| Q | Connect the selection above the timeline clip at the playhead |
| W | Insert the selection at the playhead, pushing later clips along |
| D | Overwrite the timeline from the playhead |
| Command-B | Cut the clip at the playhead or skimmer |
| A / B / T | Select, Blade and Trim tools |
| Shift-Delete | Delete a clip but leave a gap so nothing moves |
| Semicolon (;) / Apostrophe (’) | Jump to the previous or next edit point |
| Left Arrow / Right Arrow | Step one frame back or forward |
| Option-Left Bracket ([) / Option-Right Bracket (]) | Trim the start or end of a clip to the playhead |
| Command-Plus Sign (+) / Command-Minus Sign (–) | Zoom the timeline in or out |
| Shift-Z | Fit the whole project in the timeline |
| N | Turn snapping on or off |
| S | Turn skimming on or off |
| M | Add a marker at the playhead |
| Command-T | Add the default transition to the selected edit |
| Command-Z | Undo (Final Cut Pro saves automatically, so this is your safety net) |
Playback and navigation
| Shortcut | What it does |
|---|---|
| Space bar | Play or pause |
| J / K / L | Play backward, pause, play forward; press J or L again to double the speed (up to 32x) |
| Option-J / Option-L | Play backward or forward at half speed |
| Shift-Question Mark (?) | Play around the playhead |
| Slash (/) | Play the selection |
| Command-L | Turn looped playback on or off |
| Shift-Command-F | Play full screen |
| Home key (or Fn-Left Arrow) / End key (or Fn-Right Arrow) | Go to the start or end of the project |
| Semicolon (;) / Apostrophe (’) | Previous or next edit point |
| Left Arrow / Right Arrow | Back or forward one frame |
| Shift-Left Arrow / Shift-Right Arrow | Back or forward 10 frames |
| Control-Semicolon (;) / Control-Apostrophe (’) | Previous or next marker |
| S | Skimming on or off |
| Shift-S | Audio skimming on or off |
| Control-P | Type a timecode to move the playhead |
Selecting and marking
| Shortcut | What it does |
|---|---|
| I / O | Set the range start (In) and end (Out) |
| X | Set the range to the clip under the skimmer or playhead |
| Option-X | Clear the range selection |
| C | Select the clip under the pointer in the timeline |
| Command-A / Shift-Command-A | Select or deselect everything |
| M | Add a marker |
| Option-M | Add a marker and edit its name |
| Control-M | Delete the selected marker |
| F | Rate the selection as a favorite |
| Delete | Reject the selection in the browser (in the timeline, Delete removes it) |
| U | Remove the rating |
| Command-K | Open the Keyword Editor |
Shortcuts like J, K and L work in the browser and in the timeline. If a key seems to do nothing, check which area is active and press Command-2 to go to the timeline.
Editing in the timeline
| Shortcut | What it does |
|---|---|
| E | Append to the end of the storyline |
| W | Insert at the playhead |
| Q | Connect above the primary storyline |
| D | Overwrite from the playhead |
| Shift-R | Replace the selected timeline clip with the browser selection |
| Command-B / Shift-Command-B | Cut the primary storyline clip, or every clip, at the playhead |
| Delete | Delete the selection (the storyline closes the gap) |
| Shift-Delete | Delete and leave a gap |
| Option-W | Insert a gap clip |
| Option-Command-Up Arrow | Lift a clip out of the storyline as a connected clip |
| Option-Command-Down Arrow | Move a connected clip down into the primary storyline |
| Command-G | Group connected clips into a connected storyline |
| Option-G | Make a compound clip from the selection |
| V | Turn a clip off or on without deleting it |
| Option-S | Solo the selected clips |
| Control-Shift-S | Detach audio from video |
| Control-S | Show audio and video separately on the same clip |
| Option-F | Add a freeze frame at the playhead |
| Control-D | Type a new duration for the selection |
| Command-C / Command-V | Copy, then paste into the storyline at the playhead |
| Option-V | Paste as connected clips |
| Command-D | Duplicate the selected project or clip in the browser |
Trimming
| Shortcut | What it does |
|---|---|
| Option-Left Bracket ([) / Option-Right Bracket (]) | Trim the start or end of the clip to the playhead |
| Option-Backslash (\) | Trim the clip to the range selection |
| Left Bracket ([) / Right Bracket (]) | Select the left or right edge of an edit |
| Backslash (\) | Select both sides of an edit (for a roll edit) |
| Comma (,) / Period (.) | Move the selection or edit one frame left or right |
| Shift-Comma (,) / Shift-Period (.) | Move it 10 frames left or right |
| Shift-X | Extend the selected edit point to the playhead |
| Control-E | Open the Precision Editor for the selected edit |
| Option-U | Show both sides of the edit in the viewer while trimming |
Tools
| Shortcut | What it does |
|---|---|
| A | Select |
| T | Trim (roll, slip and slide edits) |
| P | Position (move clips and leave gaps instead of rippling) |
| R | Range Selection |
| B | Blade |
| Z | Zoom |
| H | Hand |
| Shift-T | Transform onscreen controls |
| Shift-C | Crop, Trim and Ken Burns controls |
| Option-D | Distort onscreen controls |
Effects, color and keyframes
| Shortcut | What it does |
|---|---|
| Command-T | Add the default transition |
| Option-T | Crossfade the audio at the selected edit |
| Option-E | Add the default video effect |
| Option-Command-C / Option-Command-V | Copy and paste all effects from one clip to others |
| Shift-Command-V | Choose which effects and settings to paste |
| Option-Command-X / Shift-Command-X | Remove all effects, or choose which attributes to remove |
| Option-A | Add an adjustment clip over the range |
| Option-Command-B | Balance Color on or off |
| Option-Command-M | Match the color to another clip |
| Control-Option-Command-O | Apply Enhance Light and Color |
| Control-V | Show the Video Animation editor (keyframes) |
| Option-K | Add a keyframe at the playhead |
| Option-Semicolon (;) / Option-Apostrophe (’) | Go to the previous or next keyframe |
| Option-Shift-Delete | Delete the selected keyframe in the Video Animation editor |
| Option-Shift-C / Option-Shift-V | Copy and paste keyframes |
| Control-Shift-V | Show one effect at a time in the Video Animation editor |
The Add Default shortcuts work with any effect, transition or title, including third-party ones. To change the default transition, open the Transitions browser (Control-Command-5), Control-click a transition and choose Make Default. Effects work the same way from the Effects browser (Command-5) with Make Default Video Effect, and titles from the Titles and Generators sidebar (Option-Command-1) with Make Default Title or Make Default Lower Third. If your default video effect is one of the color correction effects, Option-E applies the color correction chosen in Final Cut Pro > Settings > General instead.
That makes a favorite plugin one keystroke away. For example, make a Zoom Transitions preset your default transition and Command-T adds it to any selected edit, or make a Lower Third Pack 5 design your default lower third and press Control-Shift-T.

Zoom Transitions
Zoom, whip pan, tilt and rotate transitions with sound effects included. Make one your default and add it with Command-T.
New to keyframes? Our guide to keyframes in Final Cut Pro walks through every step.
Titles, audio and retiming
| Shortcut | What it does |
|---|---|
| Control-T | Connect the default title at the playhead |
| Control-Shift-T | Connect the default lower third |
| Control-Hyphen (-) / Control-Equal Sign (=) | Lower or raise the volume by 1 dB |
| Control-L | Change the volume of all selected clips by the same amount |
| Shift-Command-M | Match the audio to another clip |
| Option-Shift-A | Start or stop a voiceover recording |
| Command-R | Show the retime editor |
| Shift-H | Add a hold (freeze) segment |
| Shift-N | Create a normal speed segment |
| Option-Command-R | Reset the clip to normal speed |
Windows and views
| Shortcut | What it does |
|---|---|
| Command-1 | Libraries sidebar |
| Command-2 | Go to the timeline |
| Command-3 | Go to the viewer |
| Command-4 | Show or hide the inspector |
| Command-6 | Color inspector |
| Command-5 | Effects browser |
| Control-Command-5 | Transitions browser |
| Option-Command-1 | Titles and Generators sidebar |
| Command-7 | Video scopes |
| Command-8 | Audio enhancements |
| Command-9 | Background Tasks window |
| Shift-Command-2 | Timeline index |
| Control-Command-3 | Event viewer |
| Shift-Command-8 | Audio meters |
Library, project and export
| Shortcut | What it does |
|---|---|
| Command-N | New project |
| Option-N | New event |
| Command-I | Import media |
| Command-J | Project properties |
| Control-Command-J | Library properties |
| Command-E | Share (export) to the default destination |
| Control-R / Control-Shift-R | Render the selection, or everything that needs it |
| Shift-Command-R | Reveal the selected clip's source media file in the Finder |
| Command-F | Filter window in the browser, or timeline index in the timeline |
| Command-Comma (,) | Final Cut Pro settings |
| Option-Command-K | Open the Command Editor |
Customize shortcuts with the Command Editor
The Command Editor shows every command in Final Cut Pro and the key it uses, on a color-coded virtual keyboard. You can search it, reassign keys, add shortcuts to commands that don’t have one, and keep several command sets (see View keyboard shortcuts).
Find a shortcut
- Choose Final Cut Pro > Command Sets > Customize, or press Option-Command-K.
- Type a command name, a keyword or a key name in the search field in the top-right corner, or click keys on the virtual keyboard (including the modifier buttons at the top) to see what they do.
- Click a command in the list to read its description. Click the Keyboard Highlight button beside the search field to light up the keys for the commands in the list.
Key colors match command groups: for example, editing commands such as Overwrite (D) are blue. Click a group in the bottom-left corner to show only its commands.
Create your own shortcuts
- In the Command Editor, click the pop-up menu in the top-left corner and choose Duplicate. Name the new command set and click OK. (Working on a copy keeps the default set intact.)
- Find the command you want, by searching or browsing the command list, and select it.
- Press the key combination you want to use. Keys shaded with diagonal lines are reserved by the system and can’t be assigned. If the combination is already in use, Final Cut Pro shows the current command and asks you to confirm.
- Click Save in the lower-right corner.
Good candidates for your own shortcuts are commands you use constantly that don’t have a key by default, or that are buried in menus. Details: Modify keyboard shortcuts.
Switch, export and import command sets
- Switch sets: choose Final Cut Pro > Command Sets and pick a set, or use the pop-up menu in the Command Editor.
- Export (back up or share): choose Final Cut Pro > Command Sets > Export. Final Cut Pro saves a file with the .commandset extension.
- Import: choose Final Cut Pro > Command Sets > Import and select a .commandset file. If a set with the same name exists, you’re asked to rename it.
- Coming from another editor? Build a command set that uses the shortcuts you already know in place of the defaults.
See Export or import keyboard shortcuts.
Printable cheat sheet
Keep the essentials next to your keyboard. Our free one-page cheat sheet has the top 20 plus the most useful shortcuts for playback, editing, trimming, tools, effects and windows, ready to print on Letter or A4.
Download the cheat sheet (PDF)
Full list of Final Cut Pro keyboard shortcuts
Apple’s full table of shortcuts for common commands in Final Cut Pro 12.4, by category. Open a category to see its shortcuts, or press Command-F in your browser to search this page.
Application (9 shortcuts)
| Shortcut | Command |
|---|---|
| Command-H |
Hide Application Hide Final Cut Pro |
| Option-Command-H |
Hide Other Applications Hide all applications except Final Cut Pro |
| Option-Command-K |
Keyboard Customization Open the Command Editor |
| Command-M |
Minimize Minimize Final Cut Pro |
| Command-O |
Open Library Open an existing library or a new library |
| Command-Q |
Quit Quit Final Cut Pro |
| Shift-Command-Z |
Redo Change Redo the last command |
| Command-Comma (,) |
Settings Open the Final Cut Pro Settings window |
| Command-Z |
Undo Change Undo the last command |
Editing (125 shortcuts)
| Shortcut | Command |
|---|---|
| Control-Option-L |
Adjust Volume Absolute Adjust the audio volume across all selected clips to a specific dB value |
| Control-L |
Adjust Volume Relative Adjust the audio volume across all selected clips by the same dB value |
| E |
Append to Storyline Add the selection to the end of the storyline |
| Control-Shift-Y |
Audition: Add to Audition Add the selected clip to the audition |
| Option-Y |
Audition: Duplicate as Audition Create an audition with a timeline clip and a duplicate version of the clip, including applied effects |
| Shift-Command-Y |
Audition: Duplicate from Original Duplicate the selected audition clip without applied effects |
| Shift-Y |
Audition: Replace and Add to Audition Create an audition and replace the timeline clip with the current selection |
| Command-B |
Blade Cut the primary storyline clip (or the selection) at the skimmer or playhead location |
| Shift-Command-B |
Blade All Cut all clips at the skimmer or playhead location |
| Shift-Command-G |
Break Apart Clip Items Break the selected item into its component parts |
| Control-D |
Change Duration Change the duration of the selection |
| Shift-Command-Down Arrow |
Collapse to Connected Storyline Collapse the selected group of connected clips or storylines into a connected storyline |
| Control-Shift-T |
Connect Default Lower Third Connect the default lower third to the primary storyline |
| Control-T |
Connect Default Title Connect the default title to the primary storyline |
| Q |
Connect to Primary Storyline Connect the selection to the primary storyline |
| Shift-Q |
Connect to Primary Storyline - Backtimed Connect the selection to the primary storyline, aligning the selection’s end point with the skimmer or playhead |
| Command-C |
Copy Copy the selection |
| Command-Y |
Create Audition Create an audition from the selection |
| Command-G |
Create Storyline Create a storyline from a selection of connected clips that don’t overlap |
| Command-X |
Cut Cut the selection |
| 1 |
Cut and Switch to Viewer Angle 1 Cut and switch the multicam clip to angle 1 of the current bank |
| 2 |
Cut and Switch to Viewer Angle 2 Cut and switch the multicam clip to angle 2 of the current bank |
| 3 |
Cut and Switch to Viewer Angle 3 Cut and switch the multicam clip to angle 3 of the current bank |
| 4 |
Cut and Switch to Viewer Angle 4 Cut and switch the multicam clip to angle 4 of the current bank |
| 5 |
Cut and Switch to Viewer Angle 5 Cut and switch the multicam clip to angle 5 of the current bank |
| 6 |
Cut and Switch to Viewer Angle 6 Cut and switch the multicam clip to angle 6 of the current bank |
| 7 |
Cut and Switch to Viewer Angle 7 Cut and switch the multicam clip to angle 7 of the current bank |
| 8 |
Cut and Switch to Viewer Angle 8 Cut and switch the multicam clip to angle 8 of the current bank |
| 9 |
Cut and Switch to Viewer Angle 9 Cut and switch the multicam clip to angle 9 of the current bank |
| Delete |
Delete Delete the timeline selection, reject the browser selection, or remove a through edit |
| Option-Command-Delete |
Delete Selection Only Delete the selection and attach the connected clip or clips to the resulting gap clip |
| Shift-Command-A |
Deselect All Deselect all selected items |
| Control-Shift-S |
Detach Audio Make the audio component a connected clip |
| Shift-E |
Detect Edits Detect edits or scene changes in selected clips and split the selection into separate clips |
| Command-D |
Duplicate Duplicate the browser selection |
| Option-B |
Enable Beat Detection Analyze the selection and display a beat grid in the timeline |
| V |
Enable/Disable Clip Enable or disable playback for the selection |
| Control-S |
Expand Audio View audio and video separately for selected clips |
| Control-Option-S |
Expand/Collapse Audio Components Expand or collapse audio components for the selection in the timeline |
| Shift-X |
Extend Edit Extend the selected edit point to the skimmer or playhead position |
| Shift-Down Arrow |
Extend Selection Down In the browser list view, add the next item to the selection |
| Control-Command-Right-Arrow |
Extend Selection to Next Clip In the timeline, add the next item to the selection |
| Shift-Up Arrow |
Extend Selection Up In the browser list view, add the previous item to the selection |
| Option-Shift-Y |
Finalize Audition Dissolve the audition and replace it with the audition pick |
| W |
Insert Insert the selection at the skimmer or playhead position |
| Option-F |
Insert/Connect Freeze Frame Insert a freeze frame at the playhead or skimmer location in the timeline, or connect a freeze frame from the skimmer or playhead location in the event to the playhead location in the timeline |
| Option-W |
Insert Gap Insert a gap clip at the skimmer or playhead position |
| Option-Command-W |
Insert Default Generator Insert the default generator at the skimmer or playhead position |
| Option-Command-Up Arrow |
Lift from Storyline Lift the selection from the storyline and connect it to the resulting gap clips |
| Control-Hyphen (-) |
Lower Volume 1 dB Lower the audio volume by 1 dB |
| Control-P |
Move Playhead Position Move the playhead by entering a timecode value |
| Option-Down Arrow |
Move Down Move the selected connected clips down |
| Option-Left Arrow |
Move Left Move the selected clips to the left in the primary storyline |
| Option-Right Arrow |
Move Right Move the selected clips to the right in the primary storyline |
| Option-Up Arrow |
Move Up Move the selected connected clips up |
| Option-G |
New Compound Clip Create a new compound clip (if there’s no selection, create an empty compound clip) |
| Option-Comma (,) |
Nudge Audio Subframe Left Nudge the selected audio edit point left by one subframe , creating a split edit |
| Option-Shift-Comma (,) |
Nudge Audio Subframe Left Many Nudge the selected audio edit point left by 10 subframes, creating a split edit |
| Option-Period (.) |
Nudge Audio Subframe Right Nudge the selected audio edit point right by one subframe, creating a split edit |
| Option-Shift-Period (.) |
Nudge Audio Subframe Right Many Nudge the selected audio edit point right by 10 subframes, creating a split edit |
| Option-Down Arrow |
Nudge Down Nudge the selection down one unit |
| Comma (,) |
Nudge Left Nudge the selection one unit to the left |
| Shift-Comma (,) |
Nudge Left Many Nudge the selection 10 units to the left |
| Period (.) |
Nudge Right Nudge the selection one unit to the right |
| Shift-Period (.) |
Nudge Right Many Nudge the selection 10 units to the right |
| Option-Up Arrow |
Nudge Up Nudge the selection up one unit |
| Y |
Open Audition Open the selected audition |
| Grave Accent (`) |
Override Connections Temporarily override clip connections for the selection |
| D |
Overwrite Overwrite at the skimmer or playhead position |
| Shift-D |
Overwrite - Backtimed Overwrite from the skimmer or playhead position back |
| Option-Command-Down Arrow |
Overwrite to Primary Storyline Overwrite at the skimmer or playhead position in the primary storyline (with the selected connected clip) |
| Option-V |
Paste as Connected Paste the selection and connect it to the primary storyline |
| Command-V |
Paste Insert at Playhead Insert the Clipboard contents at the skimmer or playhead position |
| Control-Shift-Left Arrow |
Previous Angle Switch to the previous angle in the multicam clip |
| Option-Shift-Left Arrow |
Previous Audio Angle Switch to the previous audio angle in the multicam clip |
| Control-Left Arrow |
Previous Pick Select the previous clip in the Audition window, making it the audition pick |
| Shift-Command-Left Arrow |
Previous Video Angle Switch to the previous video angle in the multicam clip |
| Control-Equal Sign (=) |
Raise Volume 1 dB Raise the audio volume by 1 dB |
| Control-Command-R |
Rename Clip Rename the selected clip in the timeline |
| Shift-R |
Replace Replace the selected clip in the timeline with the browser selection |
| Option-R |
Replace from Start Replace the selected clip in the timeline with the browser selection, starting from its start point |
| Shift-Delete |
Replace with Gap Replace the selected timeline clip with a gap clip |
| Command-A |
Select All Select all clips |
| C |
Select Clip Select the clip under the pointer in the timeline |
| Command-Up Arrow |
Select Clip Above Select the clip above the current timeline selection at the skimmer or playhead location |
| Command-Down Arrow |
Select Clip Below Select the clip below the current timeline selection at the skimmer or playhead location |
| Control-Command-A |
Select Connected Clips Select all clips connected to the selected item |
| Shift-Left Bracket ([) |
Select Left Audio Edge For audio/video clips in expanded view, select the left edge of the audio edit point |
| Left Bracket ([) |
Select Left Edge Select the left edge of the edit point |
| Shift-Backslash (\) |
Select Left and Right Audio Edit Edges For audio/video clips in expanded view, select the left and right edges of the audio edit point |
| Backslash (\) |
Select Left and Right Edit Edges Select the left and right edges of the edit point |
| Control-Backslash (\) |
Select Left and Right Video Edit Edges For audio/video clips in expanded view, select the left and right edges of the video edit point |
| Control-Left Bracket ([) |
Select Left Video Edge For audio/video clips in expanded view, select the left edge of the video edit point |
| Control-Shift-Right Arrow |
Select Next Angle Switch to the next angle in the multicam clip |
| Option-Shift-Right Arrow |
Select Next Audio Angle Switch to the next audio angle in the multicam clip |
| Command-Right Arrow |
Select Next Clip Move the playhead and the selection to the next topmost timeline clip in the same role |
| Control-Right Arrow |
Select Next Pick Select the next clip in the Audition window, making it the audition pick |
| Shift-Command-Right Arrow |
Select Next Video Angle Switch to the next video angle in the multicam clip |
| Command-Left Arrow |
Select Previous Clip Move the playhead and the selection to the previous topmost timeline clip in the same role |
| Shift-Right Bracket (]) |
Select Right Audio Edge For audio/video clips in expanded view, select the right edge of the audio edit point |
| Right Bracket (]) |
Select Right Edge Select the right edge of the edit point |
| Control-Right Bracket (]) |
Select Right Video Edge For audio/video clips in expanded view, select the right edge of the video edit point |
| Shift-Command-O |
Set Additional Selection End Set an additional range selection end point at the playhead or skimmer location |
| Shift-Command-I |
Set Additional Selection Start Set an additional range selection start point at the playhead or skimmer location |
| Control-E |
Show/Hide Precision Editor When an edit point is selected, show or hide the precision editor |
| N |
Snapping Turn snapping on or off |
| Option-S |
Solo Solo the selected items in the timeline |
| Shift-1 |
Source Media: Audio & Video Turn on audio/video mode to add the video and audio portion of your selection to the timeline |
| Shift-3 |
Source Media: Audio Only Turn on audio-only mode to add the audio portion of your selection to the timeline |
| Shift-2 |
Source Media: Video Only Turn on video-only mode to add the video portion of your selection to the timeline |
| Control-Option-Command-C |
Split Caption Replace the selected captions with abutting single-line captions, one for each line of text in the original captions. |
| Option-1 |
Switch to Viewer Angle 1 Switch the multicam clip to angle 1 of the current bank |
| Option-2 |
Switch to Viewer Angle 2 Switch the multicam clip to angle 2 of the current bank |
| Option-3 |
Switch to Viewer Angle 3 Switch the multicam clip to angle 3 of the current bank |
| Option-4 |
Switch to Viewer Angle 4 Switch the multicam clip to angle 4 of the current bank |
| Option-5 |
Switch to Viewer Angle 5 Switch the multicam clip to angle 5 of the current bank |
| Option-6 |
Switch to Viewer Angle 6 Switch the multicam clip to angle 6 of the current bank |
| Option-7 |
Switch to Viewer Angle 7 Switch the multicam clip to angle 7 of the current bank |
| Option-8 |
Switch to Viewer Angle 8 Switch the multicam clip to angle 8 of the current bank |
| Option-9 |
Switch to Viewer Angle 9 Switch the multicam clip to angle 9 of the current bank |
| Option-Shift-S |
Timeline Scrolling Turn on or turn off continuous scrolling in the timeline during playback |
| G |
Toggle Storyline Mode Turn on or turn off the ability to build storylines when dragging clips in the timeline |
| Option-Right Bracket (]) |
Trim End Trim the end of the selected or topmost clip to the skimmer or playhead position |
| Option-Left Bracket ([) |
Trim Start Trim the clip start point to the skimmer or playhead position |
| Option-Backslash (\) |
Trim to Selection Trim clip start and end points to the range selection |
Effects (34 shortcuts)
| Shortcut | Command |
|---|---|
| Option-A |
Add Adjustment Clip Add an adjustment clip at the skimmer or playhead position, or to the selected range |
| Control-Shift-T |
Add Basic Lower Third Connect a basic lower-third title to the primary storyline |
| Control-T |
Add Basic Title Connect a basic title to the primary storyline |
| Option-Command-O |
Add Color Adjustment Add the Color Adjustments effect |
| Option-Command-E |
Add Default Audio Effect Add the default audio effect to the selection |
| Command-T |
Add Default Transition Add the default transition to the selection |
| Option-E |
Add Default Video Effect Add the default video effect to the selection |
| Control-Command-K |
Add Auto Mask Add an Auto Mask to the selection |
| Control-Command-M |
Add Magnetic Mask Add a Magnetic Mask to the selection |
| Control-Option-Command-O |
Enhance Light and Color Add the Color Adjustments effect and turn on Enhance Light and Color for all parameters |
| Option-Delete |
Color Board: Reset Current Board Controls Reset the controls in the current Color Board pane |
| Control-Command-C |
Color Board: Switch to the Color Pane Switch to the Color pane in the Color Board |
| Control-Command-E |
Color Board: Switch to the Exposure Pane Switch to the Exposure pane in the Color Board |
| Control-Command-S |
Color Board: Switch to the Saturation Pane Switch to the Saturation pane in the Color Board |
| Option-Command-C |
Copy Effects Copy the selected effects and their settings |
| Option-Shift-C |
Copy Keyframes Copy the selected keyframes and their settings |
| Option-T |
Crossfade Apply a crossfade to the audio edit point between the selected clips |
| Option-Shift-X |
Cut Keyframes Cut the selected keyframes and their settings |
| Option-Command-B |
Enable/Disable Balance Color Turn Balance Color corrections on or off |
| Shift-Command-M |
Match Audio Match the sound between clips |
| Option-Command-M |
Match Color Match color between clips |
| Option-Tab |
Next Text Navigate to the next text item |
| Shift-Command-V |
Paste Attributes Paste selected attributes and their settings to the selection |
| Option-Command-V |
Paste Effects Paste effects and their settings to the selection |
| Option-Shift-V |
Paste Keyframes Paste keyframes and their settings to the selection |
| Option-Shift-Tab |
Previous Text Navigate to the previous text item |
| Shift-Command-X |
Remove Attributes Remove selected attributes from the selection |
| Option-Command-X |
Remove Effects Remove all effects from the selection |
| Shift-N |
Retime: Create Normal Speed Segment Set the selection to play at normal (100 percent) speed |
| Shift-H |
Retime: Hold Create a 2-second hold segment |
| Option-Command-R |
Retime: Reset Reset the selection to play forward at normal (100 percent) speed |
| Control-Option-Command-M |
Show/Hide Magnetic Mask Editor Show or hide the Magnetic Mask editor in the timeline |
| Command-R |
Show/Hide Retime Editor Show or hide the retime editor in the timeline |
| Control-Shift-V |
Solo Animation Show one effect at a time in the Video Animation editor |
General (12 shortcuts)
| Shortcut | Command |
|---|---|
| Option-Shift-Command-C |
Consolidate Motion Content Collect all the Motion content for the selected item in one location (on one storage device) |
| Delete |
Delete Delete the timeline selection, reject the browser selection, or remove a through edit |
| Command-F |
Find Show or hide the Filter window (in the browser) or the timeline index (in the timeline) |
| Option-Command-3 |
Go to Event Viewer Make the event viewer active |
| Command-I |
Import Media Import media from a device, a camera, or an archive |
| Control-Command-J |
Library Properties Open the Library Properties inspector for the current library |
| Command-Delete |
Move to Trash Move the selection to the Finder Trash |
| Command-N |
New Project Create a new project |
| Command-J |
Project Properties Open the Properties inspector for the current project |
| Control-Shift-R |
Render All Start all rendering tasks for the current project |
| Control-R |
Render Selection Start rendering tasks for the selection |
| Shift-Command-R |
Reveal in Finder Reveal the selected event clip’s source media file in the Finder |
Marking (45 shortcuts)
| Shortcut | Command |
|---|---|
| Option-C (or Control-Option-C if the caption editor is open) |
Add Caption Add a caption to the active language subrole at the playhead location |
| M |
Add Marker Add a marker at the location of the skimmer or playhead |
| Control-C |
All Clips Change the browser filter settings to show all clips |
| Option-M |
Add Marker and Modify Add a marker and edit the marker’s text |
| Control-1 |
Apply Keyword Tag 1 Apply keyword 1 to the selection |
| Control-2 |
Apply Keyword Tag 2 Apply keyword 2 to the selection |
| Control-3 |
Apply Keyword Tag 3 Apply keyword 3 to the selection |
| Control-4 |
Apply Keyword Tag 4 Apply keyword 4 to the selection |
| Control-5 |
Apply Keyword Tag 5 Apply keyword 5 to the selection |
| Control-6 |
Apply Keyword Tag 6 Apply keyword 6 to the selection |
| Control-7 |
Apply Keyword Tag 7 Apply keyword 7 to the selection |
| Control-8 |
Apply Keyword Tag 8 Apply keyword 8 to the selection |
| Control-9 |
Apply Keyword Tag 9 Apply keyword 9 to the selection |
| Option-X |
Clear Selected Ranges Clear the range selection |
| Option-O |
Clear Range End Clear the range’s end point |
| Option-I |
Clear Range Start Clear the range’s start point |
| Control-M |
Delete Marker Delete the selected marker |
| Control-Shift-M |
Delete Markers in Selection Delete all of the markers in the selection |
| Shift-Command-A |
Deselect All Deselect all selected items |
| Control-Shift-C |
Edit Caption Open the selected caption in the caption editor |
| F |
Favorite Rate the browser selection as favorite |
| Control-F |
Favorites Change the browser filter settings to show favorites |
| Control-H |
Hide Rejected Change the browser filter settings to hide rejected clips |
| Shift-Command-K |
New Keyword Collection Create a new Keyword Collection |
| Option-Command-N |
New Smart Collection Create a new Smart Collection |
| R |
Range Selection Tool Make the Range Selection tool active |
| Delete |
Reject Mark the current selection in the browser as rejected Note: The Delete key removes selected items if the timeline is active instead of the browser. |
| Control-Delete |
Rejected Change the browser filter settings to show rejected clips |
| Control-0 |
Remove All Keywords From Selection Remove all keywords from the browser selection |
| Control-Option-D |
Roles: Apply Dialogue Role Apply Dialogue subroles to the selected clip’s components |
| Control-Option-E |
Roles: Apply Effects Role Apply Effects subroles to the selected clip’s components |
| Control-Option-M |
Roles: Apply Music Role Apply Music subroles to the selected clip’s components |
| Control-Option-T |
Roles: Apply Titles Role Apply the Titles role to the selected clip |
| Control-Option-V |
Roles: Apply Video Role Apply the Video role to the selected clip |
| Command-A |
Select All Select all clips |
| X |
Select Clip Range Set the range selection to match the boundaries of the clip below the skimmer or playhead |
| Shift-Command-O |
Set Additional Range End Set an additional range selection end point at the playhead or skimmer location |
| Shift-Command-I |
Set Additional Range Start Set an additional range selection start point at the playhead or skimmer location |
| O |
Set Range End Set the end point for the range |
| Control-O |
Set Range End Set the end point for the range while editing a text field |
| I |
Set Range Start Set the start point for the range |
| Control-I |
Set Range Start Set the start point for the range while editing a text field |
| Shift-Command-C |
Closed Captions Transcribe all spoken words as closed captions |
| Shift-Command-S |
Subtitles Transcribe all spoken words as subtitles |
| U |
Unrate Remove ratings from the selection |
Organization (7 shortcuts)
| Shortcut | Command |
|---|---|
| Option-H |
Hide Browser Clips Hide the selected browser clips |
| Option-N |
New Event Create a new event |
| Shift-Command-N |
New Folder Create a new folder |
| Shift-F |
Reveal Source in Browser Reveal the source of the selected clip in the browser |
| Option-Shift-Command-F |
Reveal Project in Browser Reveal the open project in the browser |
| Option-Shift-H |
Show/Hide Hidden Clips Show or hide hidden clips in the browser |
| Option-Command-G |
Synchronize Clips Sync the selected event clips |
Playback and navigation (67 shortcuts)
| Shortcut | Command |
|---|---|
| Shift-S |
Audio Skimming Turn audio skimming on or off |
| Control-Command-Y |
Audition: Preview Play the pick in context in the timeline |
| Option-Command-S |
Clip Skimming Turn clip skimming on or off |
| Option-Shift-3 |
Cut/Switch Multicam Audio Only Turn on audio-only mode for multicam cutting and switching |
| Option-Shift-1 |
Cut/Switch Multicam Audio and Video Turn on audio/video mode for multicam cutting and switching |
| Option-Shift-2 |
Cut/Switch Multicam Video Only Turn on video-only mode for multicam cutting and switching |
| Down Arrow |
Down Go to the next item (in the browser ) or the next edit point (in the timeline) |
| Control-Down Arrow |
Down While editing a text field, go to the next item (in the browser) or the next edit point (in the timeline) |
| Option-Command-Right Arrow |
Duplicate Range: Go to Next Related Clip Move the playhead to the next timeline clip containing the same duplicate range and select the clip |
| Option-Command-Left Arrow |
Duplicate Range: Go to Previous Related Clip Move the playhead to the previous timeline clip containing the same duplicate range and select the clip |
| Shift-Left Arrow |
Go Back 10 Frames Move the playhead back 10 frames |
| Shift-Right Arrow |
Go Forward 10 Frames Move the playhead forward 10 frames |
| Home key (or Fn-Left Arrow) |
Go to Beginning Move the playhead to the beginning of the timeline or the first clip in the browser |
| End key (or Fn-Right Arrow) |
Go to End Move the playhead to the end of the timeline or to the last clip in the browser |
| Option-Shift-Apostrophe (’) |
Go to Next Bank Display the next bank of angles in the current multicam clip |
| Apostrophe (’) |
Go to Next Edit Move the playhead to the next edit point in the timeline |
| Option-Right Arrow |
Go to Next Field Move the playhead to the next field in an interlaced clip |
| Option-Shift-Command-Right Arrow |
Go to Next Focus Point Move the playhead to the next focus point |
| Right Arrow |
Go to Next Frame Move the playhead to the next frame |
| Option-Right Arrow |
Go to Next Subframe Move the playhead to the next audio subframe |
| Option-Shift-Semicolon (;) |
Go to Previous Bank Display the previous bank of angles in the current multicam clip |
| Semicolon (;) |
Go to Previous Edit Move the playhead to the previous edit point in the timeline |
| Option-Left Arrow |
Go to Previous Field Move the playhead to the previous field in an interlaced clip |
| Option-Shift-Command-Left Arrow |
Go to Previous Focus Point Move the playhead to the previous focus point |
| Left Arrow |
Go to Previous Frame Move the playhead to the previous frame |
| Option-Left Arrow |
Go to Previous Subframe Move the playhead to the previous audio subframe |
| Shift-O |
Go to Range End Move the playhead to the end of the range selection |
| Shift-I |
Go to Range Start Move the playhead to the beginning of the range selection |
| Control-Option-Command-Right Bracket |
Look Clockwise Roll the 360° viewer clockwise |
| Control-Option-Command-Left Bracket |
Look Counterclockwise Roll the 360° viewer counterclockwise |
| Control-Option-Command-Down Arrow |
Look Down Tilt the 360° viewer down |
| Control-Option-Command-Left Arrow |
Look Left Pan the 360° viewer to the left |
| Control-Option-Command-Right Arrow |
Look Right Pan the 360° viewer to the right |
| Control-Option-Command-Up Arrow |
Look Up Pan the 360° viewer up |
| Command-L |
Loop Playback Turn looped playback on or off |
| Control-Option-Command-9 |
Mirror VR Headset Mirror the display of the connected VR headset in the 360° viewer |
| Shift-A |
Monitor Audio Turn on or turn off audio monitoring for the angle being skimmed |
| Hyphen (-) |
Negative Timecode Entry Enter a negative timecode value to move the playhead back, move a clip earlier, or trim a range or clip, depending on your selection |
| Control-Command-Right Arrow |
Next Clip Go to the next item (in the browser) or the next edit point (in the timeline) |
| Control-Apostrophe (’) |
Next Marker Move the playhead to the next marker |
| Control-Option-Command-7 |
Output to VR Headset Send 360° video to the connected VR headset |
| Option-Shift-Command-V |
Paste Timecode Move the playhead to the pasted timecode value |
| Shift-Question Mark (?) |
Play Around Play around the playhead position |
| L |
Play Forward Play forward (press L multiple times to increase the playback speed) |
| Option-Space bar |
Play from Playhead Play from the playhead position |
| Shift-Command-F |
Play Full Screen Play full screen from the skimmer or playhead position |
| Option-L |
Play Rate .5 Play at half speed |
| Option-J |
Play Rate -.5 Play in reverse at half speed |
| J |
Play Reverse Play in reverse (press J multiple times to increase the reverse playback speed) |
| Control-J |
Play Reverse Play in reverse while editing a text field (press J multiple times to increase the reverse playback speed) |
| Shift-Space bar |
Play Reverse Play in reverse |
| Slash (/) |
Play Selection Play the selection |
| Control-Shift-O |
Play to End Play from the playhead to the end of the selection |
| Space bar |
Play/Pause Start or pause playback |
| Control-Space bar |
Play/Pause Start or pause playback while editing a text field |
| Equal Sign (=) |
Positive Timecode Entry Enter a positive timecode value to move the playhead forward, move a clip later, or trim a range or clip, depending on your selection |
| Control-Command-Left Arrow |
Previous Clip Go to the previous item (in the browser) or the previous edit point (in the timeline) |
| Control-Semicolon (;) |
Previous Marker Move the playhead to the previous marker |
| Shift-V |
Set Monitoring Angle Set the angle being skimmed as the monitoring angle |
| S |
Skimming Turn skimming on or off |
| Option-Shift-A |
Start/Stop Voiceover Recording Start or stop recording audio from the Record Voiceover window |
| K |
Stop Stop playback |
| Control-K |
Stop Stop playback while editing a text field |
| Command-Left Bracket ([) |
Timeline History Back Go back one level in the timeline history |
| Command-Right Bracket (]) |
Timeline History Forward Go forward one level in the timeline history |
| Up Arrow |
Up Go to the previous item (in the browser) or the previous edit point (in the timeline) |
| Control-Up Arrow |
Up While editing a text field, go to the previous item (in the browser) or the previous edit point (in the timeline) |
Share and tools (11 shortcuts)
| Shortcut | Command |
|---|---|
| Command-E |
Share to Default Destination Share the selected project or clip using the default destination |
| A |
Select (Arrow) Tool Make the Select tool active |
| B |
Blade Tool Make the Blade tool active |
| Control-Shift-F |
Cinematic Tool Make the Cinematic tool active and display onscreen controls for the selected clip or the topmost clip under the playhead |
| Shift-C |
Crop Tool Make the Crop tool active and display onscreen controls for the selected clip or the topmost clip under the playhead |
| Option-D |
Distort Tool Make the Distort tool active and display onscreen controls for the selected clip or the topmost clip under the playhead |
| H |
Hand Tool Make the Hand tool active |
| P |
Position Tool Make the Position tool active |
| Shift-T |
Transform Tool Make the Transform tool active and display onscreen controls for the selected clip or the topmost clip under the playhead |
| T |
Trim Tool Make the Trim tool active |
| Z |
Zoom Tool Make the Zoom tool active |
View (28 shortcuts)
| Shortcut | Command |
|---|---|
| Control-Option-F |
Show/Hide Cinematic Editor Show or hide the Cinematic Editor for the selected timeline clips |
| Control-Option-6 |
Clip Appearance: Clip Labels Only Depending on the clip name setting, display timeline clips with clip names, role names, or active angle names only |
| Control-Option-Down Arrow |
Clip Appearance: Decrease Waveform Size Decrease the size of audio waveforms for timeline clips |
| Control-Option-5 |
Clip Appearance: Filmstrips Only Display timeline clips with large filmstrips only |
| Control-Option-Up Arrow |
Clip Appearance: Increase Waveform Size Increase the size of audio waveforms for timeline clips |
| Control-Option-4 |
Clip Appearance: Large Filmstrips Display timeline clips with small audio waveforms and large filmstrips |
| Control-Option-2 |
Clip Appearance: Large Waveforms Display timeline clips with large audio waveforms and small filmstrips |
| Control-Option-3 |
Clip Appearance: Waveforms and Filmstrips Display timeline clips with audio waveforms and video filmstrips of equal size |
| Control-Option-1 |
Clip Appearance: Waveforms Only Display timeline clips with large audio waveforms only |
| Shift-Command-Hyphen (-) |
Decrease Clip Height Decrease the browser clip height |
| Shift-Command-Equal Sign (=) |
Increase Clip Height Increase the browser clip height |
| Control-Option-Command-S |
Expand/Collapse Subroles Expand or collapse subroles |
| Shift-Command-Comma (,) |
Show Fewer Filmstrip Frames Show fewer filmstrip frames in browser clips |
| Shift-Option-P |
Show Image Playground Show the Image Playground window |
| Option-U |
Show/Hide 2-Up When Trimming Show or hide the two-up editing view when trimming clips |
| Control-A |
Show/Hide Audio Animation Show or hide the Audio Animation editor for the selected clips or components |
| Option-Shift-Command-S |
Show/Hide Audio Lanes Show or hide audio lanes |
| Control-Y |
Show/Hide Skimmer Info Show or hide clip information when skimming in the browser |
| Control-V |
Show/Hide Video Animation Show or hide the Video Animation editor for the selected timeline clips |
| Shift-Command-Period (.) |
Show More Filmstrip Frames Show more filmstrip frames in browser clips |
| Option-Shift-Command-Comma (,) |
Show One Frame per Filmstrip Show one frame per filmstrip |
| Option-Command-2 |
Toggle Filmstrip/List View Switch the browser between filmstrip view and list view |
| Option-Shift-Z |
Vertical Zoom to Fit Zoom the timeline contents to fit the height of the timeline |
| Option-Shift-N |
View Clip Names Show or hide clip names in the browser |
| Command-Plus Sign (+) |
Zoom In Zoom in to the browser, viewer , or timeline |
| Command-Minus Sign (–) |
Zoom Out Zoom out of the browser, viewer, or timeline |
| Shift-Z |
Zoom to Fit Zoom the contents to fit the size of the browser, viewer, or timeline |
| Control-Z |
Zoom to Samples Turn zooming in to audio samples on or off |
Windows (43 shortcuts)
| Shortcut | Command |
|---|---|
| Control-Option-Command-3 |
Anaglyph Switch to the Anaglyph view ( stereoscopic video) |
| Control-Option-Command-4 |
Anaglyph Monochrome Switch to the Anaglyph Monochrome view (stereoscopic video) |
| Control-Option-Command-5 |
Anaglyph Outline Switch to the Anaglyph Outline view (stereoscopic video) |
| Command-9 |
Background Tasks Show or hide the Background Tasks window |
| Control-Option-Command-Grave Accent (`) |
Both Eyes View left and right eyes side by side in the viewer (stereoscopic video) |
| Control-Option-Command-Equal Sign (=) |
Decrease Field of View Narrow the field of view in the 360° viewer |
| Control-Option-Command-7 |
Difference View left and right eye differences in the viewer (stereoscopic video) |
| Command-8 |
Go to Audio Enhancements Make the Audio Enhancements inspector active |
| Command-1 |
Go to Browser Make the browser active |
| Command-6 |
Go to Color Inspector Make the Color inspector active and add the Color Adjustments effect |
| Option-Command-4 |
Go to Inspector Make the current inspector active |
| Command-2 |
Go to Timeline Make the timeline active |
| Command-3 |
Go to Viewer Make the viewer active |
| Control-Option-Command-Minus Sign (–) |
Increase Field of View Widen the field of view in the 360° viewer |
| Control-Option-Command-1 |
Left Eye Only View only the left eye in the viewer (stereoscopic video) |
| Control-Tab |
Next Tab Go to the next pane in the inspector or the Color Board |
| Control-Shift-Tab |
Previous Tab Go to the previous pane in the inspector or the Color Board |
| Option-Command-8 |
Record Voiceover Show or hide the Record Voiceover window |
| Control-Option-Command-0 |
Reset Angle Reset the point of view in the 360° viewer |
| Control-Option-Command-Delete |
Reset Field of View Reset the field of view in the 360° viewer |
| Control-Option-Command-2 |
Right Eye Only View only the right eye in the viewer (stereoscopic video) |
| Shift-Command-H |
Show Horizon Show the horizon in the viewer |
| Control-Command-V |
Show Vectorscope Show the vectorscope in the viewer |
| Control-Command-W |
Show Video Waveform Show the waveform monitor in the viewer |
| Shift-Command-7 |
Show/Hide Angles Show or hide the angle viewer |
| Shift-Command-8 |
Show/Hide Audio Meters Show or hide the audio meters |
| Control-Command-1 |
Show/Hide Browser Show or hide the browser |
| Control-Command-6 |
Show/Hide Comparison Viewer Show or hide the comparison viewer |
| Command-5 |
Show/Hide Effects Browser Show or hide the Effects browser |
| Control-Command-5 |
Show/Hide Transitions Browser Show or hide the Transitions browser |
| Control-Command-3 |
Show/Hide Event Viewer Show or hide the event viewer |
| Command-4 |
Show/Hide Inspector Show or hide the inspector |
| Command-K |
Show/Hide Keyword Editor Show or hide the keyword editor |
| Command-1 |
Show/Hide Libraries Show or hide the Libraries sidebar |
| Shift-Command-1 |
Show/Hide Photos, Videos, and Audio Show or hide the Photos, Videos, and Audio sidebar |
| Command-Grave Accent (`) |
Show/Hide Sidebar Show or hide the sidebar |
| Option-Command-7 |
Show/Hide 360° Viewer Show or hide the 360° viewer |
| Control-Command-2 |
Show/Hide Timeline Show or hide the timeline |
| Shift-Command-2 |
Show/Hide Timeline Index Show or hide the timeline index for the open project |
| Option-Command-1 |
Show/Hide Titles and Generators Show or hide the Titles and Generators sidebar |
| Command-7 |
Show/Hide Video Scopes Show or hide the video scopes in the viewer |
| Control-Option-Command-6 |
Superimpose View the left and right eyes superimposed in the viewer (stereoscopic video) |
| Control-Command-4 |
Toggle Inspector Height Switch between the half-height view and full-height view in the inspector |
Want more ready-made tools for your edits? The MEGA BUNDLE includes every FCPeffects plugin, from transitions and titles to color and effects, in one download.
FAQ
How do I see all keyboard shortcuts in Final Cut Pro?
Choose Final Cut Pro > Command Sets > Customize, or press Option-Command-K, to open the Command Editor. Click a key on the virtual keyboard to see what it does, or search by command name or key. Apple also publishes a full table of shortcuts in the Final Cut Pro User Guide.
How do I change or add a keyboard shortcut in Final Cut Pro?
Open the Command Editor (Option-Command-K), duplicate the default command set from the pop-up menu in the top-left corner, find the command in the list, press the key combination you want, then click Save. If the keys are already used, Final Cut Pro asks you to confirm the change.
Can I use Premiere Pro or other editing shortcuts in Final Cut Pro?
Yes. You can build a command set that substitutes the shortcuts you know from another app, or import a .commandset file that someone else has made, with Final Cut Pro > Command Sets > Import.
How do I back up my custom shortcuts or move them to another Mac?
In the Command Editor, choose Export from the pop-up menu in the top-left corner (or choose Final Cut Pro > Command Sets > Export). That saves a .commandset file you can import on another Mac.
What are J, K and L in Final Cut Pro?
J plays backward, K stops and L plays forward. Press J or L more than once to play faster. Hold down K and press J or L to move one frame at a time.
Why doesn't a shortcut work?
Check that the right part of the window is active: many shortcuts act on the browser, timeline or viewer, depending on which has focus. Press Command-1, Command-2 or Command-3 to move focus. A custom command set may also have remapped the key; open the Command Editor to check.
What is the shortcut for the blade tool in Final Cut Pro?
Press B for the Blade tool, or Command-B to cut the clip at the playhead without changing tools. Shift-Command-B cuts every clip at the playhead.
